What is Jane Niu connector? What is the structure?

Jane usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the Janniu connector and the horn connector is that the Janniu connector has removed the clips on both sides.

According to the requirements, the peripheral dimensions of the Jane connector usually include 1.27 spacing, 2.0 spacing and 2.54 spacing; according to the different spacing, the diameter of the square needle row used will change accordingly. The contact surface between the bottom and the PCB board can be designed as SMT patch type or DIP direct insertion 180 degrees. Jane usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the Janniu connector and the horn connector is that the Janniu connector has removed the clips on both sides.

According to the requirements, the peripheral dimensions of the Jane connector usually include 1.27 spacing, 2.0 spacing and 2.54 spacing; according to the different spacing, the diameter of the square needle row used will change accordingly. The contact surface between the bottom and the PCB board can be designed as SMT patch type or DIP straight plug 180 degrees.

Function: After soldering on the PCB board, connect the IDC flat cable of the corresponding specification, and then form the circuit connection method required by the designer with other circuits. It is usually used to transmit control signals and weak currents. Jane Niu connector is a kind of universal connection device widely used in electronics, electrical appliances and instruments, mainly for current or signal transmission. It is commonly used with line pins to form board-to-board connections. It has four basic structural components:

1. Contact person. It is the core part of the bus connector that completes the electrical connection function. Typically, a contact pair consists of a positive contact and a negative contact, and an electrical connection is made by inserting the negative contact and the positive contact.

2) Housing. Also called a shell, it is the cover of the Jane Niu connector. It provides mechanical protection for the built-in insulated mounting plate and pins, and provides alignment when the plug and socket are inserted, thereby fixing the Jane Niu connector to the device.

3. Insulator. The insulator is also commonly referred to as the base or insert of a Jane Niu connector. Its function is to arrange the contacts according to the required position and spacing, and to ensure the insulation performance between the contacts and between the contacts and the housing. Good insulation resistance, withstand voltage performance and easy processing are the basic requirements for selecting insulating materials processed into insulators.

4. Annex. Accessories are divided into structural accessories and installation accessories. Structural accessories, such as snap rings, positioning keys, positioning pins, guide pins, connecting rings, cable clamps, sealing rings, gaskets, etc. Install accessories, such as screws, nuts, screws, spring rings, etc. Most accessories are standard parts and universal parts.

Janniu connector stamping terminals can avoid capillary cracks during bending and ensure a complete electromechanical connection. The coplanar tolerance of the pin is controlled to ± 0.05mm. The surface mount pin coplanar detection ensures the reliability of the circuit board assembly process, ensures good soldering, improves the product quality rate, and reduces the cost. It also improves the firmness of the right-angle FPC connector to prevent damage to the row pins and row bus due to improper operation. It is very appropriate to describe it as "unbreakable.